PRODUCTS
GENERAL
All our products are manufactured locally, using the highest quality polymers
PRODUCTS
GENERAL
CROWD BARRIER
Our crowd barrier is a safe, cost effective and aesthetically pleasing solution for demarcation and crowd control at any event. The barrier's lightweight, swivel feet and simple interlocking mechanism make it effortless to set up on any terrain.

Length: 1.5m
Width: 50mm
Height: 1.2m
Weight: 9kg
Material: Linear low density polyethylene
Available in a range of colours

PRODUCTS
GENERAL
TRUCK MUDGUARD
Our robust mudguard is near indestructible and designed to withstand the elements and South African driving conditions.

Maximum wheel diameter: 44" (1100mm)
Weight: 8kg
Material: Linear low density polyethylene
Available in black only

PRODUCTS
GENERAL
IRRIGATION DRUM
Our irrigation drum has a removable lid and an outlet near the bottom to which a hose can be connected, making it ideal for collecting rain water and for irrigation.

Capacity: 210 litres
Diameter: 600mm
Height: 1000mm
Weight: 8kg
Material: Linear low density polyethylene
Available in a range of colours

PRODUCTS
LIGHTING
INTRODUCTION
All our lighting products are manufactured using an opaque polymer, which produces beautifully even, soft light. We have an extensive range of shapes and sizes to suit almost any purpose.
PRODUCTS
LIGHTING
SPHERES
We manufacture a large variety of lighting spheres from 250mm in diameter up to 550mm. These polymer spheres are nearly indestructible and their opaque surfaces emit soft and even light.
PRODUCTS
LIGHTING
HALF SPHERE
Our half sphere is available in 300 and 400mm diameters, with the thread either on the rim or the round side, allowing it to be used in a variety of mountings.
PRODUCTS
LIGHTING
200 CYLINDER
Our 200 cylinder measures 200mm in height with a 110mm diameter. It is made of a durable polymer, with an opaque finish that emits soft, even light and is supplied sealed at both ends.
PRODUCTS
LIGHTING
600 CYLINDER
Our 600 cylinder measures 200mm in height with a 180mm diameter. It is made of a durable polymer, with an opaque finish that emits soft, even light and can be supplied sealed at both ends or threaded on one end, allowing a variety of uses.
PRODUCTS
LIGHTING
1500 CYLINDER
Our 1 500 cylinder measures 1.5m in height with a 110mm diameter. It is made of a durable polymer, with an opaque finish that emits soft, even light and is supplied sealed at both ends.
PRODUCTS
LIGHTING
STANDARD LENS
We manufacture a large variety of lighting spheres from 250mm in diameter up to 550mm. These polymer spheres are nearly indestructible and their opaque surfaces emit soft and even light.
PRODUCTS
SANITATION
INTRODUCTION
We have a large range of sanitation products that were designed keeping the South African environment in mind. As such, all our sanitation products are cost-effective and durable.
PRODUCTS
SANITATION
PPT CUBICLE
The PPT cubicle is our robust and cost effective portable toilet system, with thousands already in use at mines, construction sites and informal settlements. Basic units are available in waste drum or waste tank configurations with the option of adding extras such as washbasins and urinal.

Length: 1m
Width: 1m
Height: 2m
Weight: ± 75kg
Material: Linear low density polyethylene
Available in a range of colours

PRODUCTS
SANITATION
HI TECH CUBICLE
Our Hi Tech cubicle has a rotationally moulded base, tank and roof with injection moulded walls and door, providing a neater finish. Optional extras include a foot pump operated basin and a hand pump operated flushing system.

Length: 1.1m
Width: 1.1m
Height: 2m
Weight: ± 90kg
Material: Linear low density polyethylene
Available in blue/grey

PRODUCTS
SANITATION
URINAL
Our urinal is designed to last a lifetime and is ready to be installed, as we supply it with a plumbing trap. It can also be mounted inside the PPT cubicle, as an optional extra.

Weight: 1.2kg
Available in white and grey

PRODUCTS
SANITATION
LONG DROP OUTER
We designed this pedestal to be used with a pit latrine, either mounted atop an underground septic tank or simply placed over the hole in the ground.

Weight: 2.1kg
Available in white and grey

PRODUCTS
SANITATION
POLYPAN
Our Polypan is a toilet base with no joints, making it leak-proof. We designed it to be used comfortably without a seat, which is ideal for areas prone to vandalism.

Weight: 2.6kg
Available in white and grey

PRODUCTS
SANITATION
4 STAGE PEDESTAL
Designed to be used with the Four Stage Human Waste Sanitation System, our pedestal is the seat that is mounted atop the underground septic tank. The clean, simple design is virtually unbreakable.

Weight: 3kg
Available in white and grey

PRODUCTS
SANITATION
WASH BASIN
Our plastic wash basin will not crack or chip, making it perfect for use in areas prone to vandalism, such as public restrooms. It is also an optional addition to our PPT cubicle.

Weight: 1.5kg
Available in white and grey

PRODUCTS
CUSTOM
INTRODUCTION
These are products we custom-designed and manufacture for clients. As such we don't supply these products directly to the public but please do contact the relevant suppliers for any product-related enquiries.
PRODUCTS
CUSTOM
HIPPO ROLLER
We developed the mould for the Hippo Water Roller, which is designed to be filled with water and pushed along the ground. The rotationally moulded drum is manufactured to withstand being rolled along rough, rural terrain. Please visit www.hipporoller.org
PRODUCTS
CUSTOM
GO LINE TURF MARKER
We produce the Go Line Turf Marking Machine's tank, which is rotationally moulded with two inlets on the upper side that are covered with injection moulded caps. We also developed the mould for this product. Please visit www.durapaints.co.za
PRODUCTS
CUSTOM
BATTERY BOX
We produce this housing for the Portable Power Pack. We also developed the mould for this sturdy battery box, which is designed to house any standard car battery and features a slide-lock lid for easy access. Please visit www.nationalluna.co.za
PRODUCTS
CUSTOM
KNAPSACK
We developed the mould for, and manufacture the tank for the Knapsack, which is a firefighting tank designed to be carried on one's back. The tank holds 20 litres and the pump is operated by hand. Please visit www.flashfire.co.za
PRODUCTS
CUSTOM
MOM'S CAR
We developed the mould for the Mom's car, as well as manufacture the product. It is designed to slide onto the front of a shopping trolley and has seating compartment for a small child. Please visit www.zapop.com
PRODUCTS
CUSTOM
TELEBOX
We designed and manufactured the mould for the Telebox, an underground access or joining box for telecommunications networks. We designed it to be lightweight, but still withstand a 2 tonne load. Made of durable polyethylene, it is also less prone to cracking than traditional concrete structures. Please visit www.nextube.co.za
PRODUCTS
CUSTOM
'POLY RIB' SEPTIC TANK
We produce the "Poly-Rib" septic tank from the mould that we also manufactured. The corrugated walls provide structural strength and an internal spreader beam reinforces the domed ends against possible abnormal pressures. Please visit www.ballamwaterslot.co.za
MOULDS
MOULDS
INTRODUCTION
We can produce three types of moulds:
  • Fabricated steel, which is less costly and is the quickest to manufacture
  • Cast aluminium and machined aluminium, which delivers the best finsish and size tolerance
We are able to oversee your entire project – from developing the product concept through to building the mould and finally delivering a finished product. Click here for examples of products we helped develop.
MOULDS
MOULDING MACHINES
INTRODUCTION
We specialise in building 3-arm carousel machines, which are better suited to higher volume production than rock-and-roll or shuttle machines. The size of each machine refers to the largest volume tank it is capable of running and the standard machines we build are:
  • 500l carousel
  • 2000l carousel
  • 3500l carousel
  • 5000l carousel
We can design and build custom machines, such as the 10 000l or 3 500l shuttle machines we have built and we have supplied machines across Africa.
CONSULTING
We have experts available to consult on any part of the rotational moulding process, from developing the product concept, to cad design, building the mould and manufacturing the finished product.
CONTACTS
Holding 268 c/o Rein & Summit Road
Bridle Park
Midrand

P O Box 1943
Halfway House
1685

Tel: 011 464 5283/1083
Fax: 0866954043

CONTACT FORM
Full Name:
Surname:
Email:
Comment:
Thank you. Your comment has been submitted successfully
Please complete all required fields.
Sorry, your comment submission failed. Please try again later
An ERROR occured while submitting your form. Please try again later.